Re:VacMouseketeers POST HERE!!!!

[Steven Almas]

aiki wrote:

quote :

Same here with the vertical “smart” Foodsaver. I am trying to trick the mechanism, but have been unsuccessful so far.

I was able to get it to work, but it’s a pain. What I did was open up the unit, like you’re going to clean out the drip tray, align the VacMouse and bag so the VacMouse “tail” (See my testing) was in the drip tray and the drybag was just short of the vac channel. Then close up the unit carefully so nothing shifts and slowly wiggle the drybag back and forth, moving it forward into the vac channel and the machine would kick off. Assuming, nothing moved around while doing this, it would vacuum and seal…but this was a huge PAIN.

Good Luck.