The Original Dry Bag Steak | Make Artisan Dry Age Steak at Home › Forums › Dry Aging Steak › Dry Aging Steak with UMAi Dry® › First run with UMAi–
- This topic has 9 replies, 4 voices, and was last updated 4 years, 7 months ago by
Thea.
-
AuthorPosts
-
January 14, 2020 at 8:39 pm #3695
John
MemberHello,
Starting my first journey with dry aging and just wanted to make sure I’m on the right track as it progresses and make sure there aren’t any issues.
Started with a full 7 rib ribeye roast about #20. Was too big for the bags (used ribeye/striploin) so I removed the ribs and broke the meat down into two about 7 pound pieces. After a little learning feel good about seal and contact with the bags. Put in our fridge on a wire rack. The fridge is modern and is our primary fridge–we keep it clean and open and close regularly…
Two questions to start–was it a good idea to remove the bones? I’m going to smoke them and have a good beef treat so they won’t go to waste. Second, are we good with the fridge? We actually also just lost our furnace so it’s been more like a “garage fridge” for a day with the inside temp being 50, but will be back up to 70 by the end of the day.
Thanks for any thoughts!
January 14, 2020 at 9:20 pm #12881Ron Pratt
MemberWell, Sir, to be perfectly blunt…you should not have cut out the bones since unless you had the utmost sanitary conditions there is a good chance you have contaminated the surface of the meat. However, if that meat wasn’t purchased in a cryovac bag, but instead was purchased out of a grocery or butcher’s display case then that meat probably already had surface mold spores.
When you said “bags” I’m hoping you in fact meant plural and used 2 bags and didn’t place both pieces in the same bag.
As for the furnace issue your inside temp of 50º should not be an issue for that short of a period.
Keep an eye on the meat and if you see white mold spores starting to develop then those can be wiped off the meat before trimming, but if the meat starts to stink then there may be other issues.
Sorry to be the bearer of bad news, but it is what it is…
RonJanuary 14, 2020 at 9:32 pm #12882John
MemberThanks for the quick reply. Knowing the risks I did everything I could to create a sanitary environment–other than odor what are the other key indicators I should look for to determine if it’s going wrong? Conversely, what would I be seeing to know it’s going right?
Thanks again
January 14, 2020 at 9:53 pm #12883Ron Pratt
MemberKeep in mind that dry aged meat smells earthy or nutty to most folks. I already mentioned being on the lookout for white mold spores – white is ok within reason, but green are not! How long do you plan to age the meat? With rib eye being thick as it is it can readily go longer like 35 to 45 days or longer. Personally I prefer 45 days for my tastes, but suit yourself!
RonJanuary 15, 2020 at 2:23 am #12884John
MemberI did put them in 2 separate bags, the first is for my wife’s Birthday party, so that’ll be capped at 28 days. I’m hoping to be able to get by with that and age the other closer to 45 days….fingers crossed
January 28, 2020 at 6:34 pm #12904Paul
MemberHello.
I try for first time.
I can get my meat only for a butcher and not with cryobag.what can i do before put the meat into the umai bag to avoid contamination.
I Will leave it for 30 days in abig fridge with air circulation at 2-3 degrees CelsiusJanuary 28, 2020 at 11:26 pm #12905Ron Pratt
MemberPaul,
There’s not a lot you can do to prevent contamination in that case that won’t in itself risk more chance for contamination! The best I can advise you is to keep an eye out for signs of mold inside the bag on the surface of the meat. Some white mold spores can later be washed off, but green mold spores mean trouble. Also your nose will give you an indication that the meat has started to go bad. Good luck!
RonJanuary 29, 2020 at 2:47 am #12906John
MemberFYI–about 2 weeks in, no green mold no funky smell, looking good. Kinda has the yogurty smell which I think I’ve read is the normal smell? Smell is not my strong suit, but my wife has a very sensitive nose and hasn’t complained yet.
Will post pics and update when finished!
January 29, 2020 at 3:17 am #12907Ron Pratt
MemberSounds good!
RonJanuary 29, 2020 at 5:52 am #12908Thea
KeymasterPaul,
Do your very best to request that your butcher give you a piece of meat that has not been touched or trimmed, if at all possible.
If you must buy it outside of the processor packaging, when you get home prepare a clean surface with either kitchen parchment or foil. Run tap water over the surface of the meat (after washing your hands thoroughly, of course ). Rest the meat on the prepared surface. This will have rinsed off many potential contaminants, but more importantly, it will provide the moist surface that is critical for good UMAi Dry® membrane bond.
UMAi Dry is not a vacuum bag and requires a very moist meet surface to create a good bond.
-
AuthorPosts
- The forum ‘Dry Aging Steak with UMAi Dry®’ is closed to new topics and replies.