The Original Dry Bag Steak | Make Artisan Dry Age Steak at Home › Forums › UMAi Dry® Sealing › Sealing Questions › Air pockets and mold.
- This topic has 5 replies, 4 voices, and was last updated 11 years, 8 months ago by
Wayne.
-
AuthorPosts
-
June 13, 2014 at 10:12 pm #2036
Wayne
MemberAs a newbie I’m sure I missed some things, specifically air pockets…I didn’t spend the time learning how the UMAi and my food vac acted together. So anyway, I’m about 3 weeks in on some sopressata and have some separation on the ends, where I suspect air pockets, and one complete failure and separation all the way up.
The meat is firm with no smell, but there are a couple of mold spots, greenish.
Weight is 14 1/8 oz and I started with 16oz chubs.
Should I be suspect of the greenish mold, and discard the whole chub? Cut it off? or could I remove the casing and use a vinegar wash, string wrap and rehang the whole thing?
Thanks in advance.
June 14, 2014 at 2:00 am #8321Rick
Memberquote Waynebox” post=5656:As a newbie I’m sure I missed some things, specifically air pockets…I didn’t spend the time learning how the UMAi and my food vac acted together. So anyway, I’m about 3 weeks in on some sopressata and have some separation on the ends, where I suspect air pockets, and one complete failure and separation all the way up.The meat is firm with no smell, but there are a couple of mold spots, greenish.
Weight is 14 1/8 oz and I started with 16oz chubs.
Should I be suspect of the greenish mold, and discard the whole chub? Cut it off? or could I remove the casing and use a vinegar wash, string wrap and rehang the whole thing?
Thanks in advance.
Sorry to hear of the air pockets and mold.
Some green molds are not bad. I tend to stay with the white molds. You can use a vinegar wipe and reseal.
TIP: When you make some new chubs. Seal the end of your UMAi bag straight then seal at an angle on each corner of the bottom. Before stuffing the bag crank the meat right to the end of the tube, slide the UMAi bag on and press the sealed end right into the meat and push into the tube. This will eliminate air pockets in the corners of the bag. If you look at my Salumi prepping post i show how i sealed the ends.
Hope this helps some.
Enjoy.
June 28, 2014 at 8:46 pm #8393Milton Rosario
MemberI’m Newbie too and the same green and white mold in a bresaola. start with the white one and one and a half week turn to green this is the 9 week of the meat in the refrigerator please let me know what I have to do with the meat! 🙁
June 28, 2014 at 9:29 pm #8394Jim
MemberHello,
Welcome to the forum. The forming of mold typically happens when aging in a mini fridge which does not have a circulation fan or a fridge that is located in a humid/hot environment like an outside garage. Moisture can not be adequately removed from the surface due to lack of circulation or excessive humidity.
June 29, 2014 at 3:56 am #8396Milton Rosario
Memberok what i do discard the bresaola or I can saved? thanks for your help!
June 29, 2014 at 4:36 am #8397Wayne
Membermy humidly was high, what should it be running normally?
-
AuthorPosts
- The forum ‘Sealing Questions’ is closed to new topics and replies.